LBC-4000 L-Band Up/Down Converter System
Updating Firmware
Reboot the LBC‐4000 and v
B.
firmware version displayed on the LBC‐4000 front panel (where X.X.X represents the properly
transferred firmware version), for example:
7. To load the second image, repeat the steps (1 through 6) provided in this section.
The LBC‐4000 is now operating with its latest firmware. The firmware update
process is now complete.
erify that the new firmware version has booted by observing the
LBC-4000
Ver: X.X.X
SN:XXXXXXXXX
4–9
Revision 4
MN/LBC4000.IOM