LBC-4000 L-Band Up/Down Converter System
Appendix B
B.3.3
CONFIG: Redund (Redundancy)
Redundancy
Mode
State
Use the [←][→] arrow keys to select Mode, State, or FrcBkup, and then press [ENT].
CONFIG: Redund
Redundancy
Control Mode = Manual
Use the [↑][↓] arrow keys to select Manual or Auto, and then press [ENT].
Note that, if you attempt to access this menu and the Redundancy Control State is selected as
Disabled, the following message displays:
Not in Redundancy
CONFIG: Redund
Redundancy Mode:
Control State = Enable
Use the [↑][↓] arrow keys to select Disable or Enable, and then press [ENT].
CONFIG: Redund
Config Manual Redund:
Force Backup
Use the [↑][↓] arrow keys to select YES or NO. By selecting YES, and then pressing [ENT], this
forces the redundant unit into standby mode.
Note that, if you attempt to access this menu and the Redundancy State is selected as Disabled,
the following message displays:
Not Available in
Current Mode
FrcBkup
Mode
Mode!
State
FrcBkup
NO
B–6
Revision 4
MN/LBC4000.IOM