Examples Of Multi-Hazard Notices; Recommended Standard Designations; Metric Conversion; Safety And Compliance - Comtech EF Data LBC-4000 Installation And Operation Manual

LBC-4000 L-Band Up/Down Converter System
Preface

Examples of Multi-Hazard Notices

Recommended Standard Designations

Recommended Standard (RS) Designations have been superseded by the new designation of the
Electronic Industries Association (EIA). References to the old RS designation (e.g., RS‐232) may
appear when depicting actual text on the serial interface or the physical unit (e.g., front panel
menus or rear panel labeling). All other references in the manual specify the EIA designations.

Metric Conversion

Comtech EF Data provides non‐Metric to Metric conversions tables on the inside back cover of
this manual to assist the operator in cross‐referencing such information.
The user should carefully review the following information:

Safety and Compliance

Electrical Safety and Compliance

The unit complies with the EN 60950 Safety of Information Technology Equipment (Including
Electrical Business Machines) safety standard.
IF THE UNIT IS OPERATED IN A VEHICLE OR MOVABLE INSTALLATION, MAKE SURE
THE UNIT IS STABLE. OTHERWISE, EN 60950 SAFETY IS NOT GUARANTEED.

Electrical Installation

CONNECT THE UNIT TO A POWER SYSTEM THAT HAS SEPARATE GROUND, LINE AND
NEUTRAL CONDUCTORS. DO NOT CONNECT THE UNIT WITHOUT A DIRECT
CONNECTION TO GROUND.
x
Revision 4
MN/LBC4000.IOM