Comtech EF Data LBC-4000 Installation And Operation Manual page 50

LBC-4000 L-Band Up/Down Converter System
Updating Firmware
C. Use the 'Run' and 'Browse' windows to create and rename the temporary folder.
•
Select [Start] on the Windows taskbar and then click the Run... icon. The 'Run'
window will open.
•
Click [Browse] in the 'Run' window. The 'Browse' window will open.
•
Click the Create New Folder icon in the 'Browse' window. The new folder will be
created.
•
Right‐click the 'New Folder' folder name, and then rename this folder to "temp" or
some other convenient, unused name.
D. Use Windows Command‐line to create the temporary folder.
•
First, click [Start] on the Windows taskbar, and then click the 'Run...' icon (or,
depending on Windows OS versions prior to Windows 95, click the 'MS‐DOS
Prompt' icon from the Main Menu).
•
Next, open a Command‐line window...
o For Windows 95 or Windows 98 – Type "command".
o For any Windows OS versions later than Windows 98 – Type "cmd" or
o Alternately, from [Start], select All Programs > Accessories > Command
o Finally, from the Command‐line 'c:\>' prompt, type "mkdir temp" or "md temp"
"command".
Prompt.
(mkdir and md stand for make directory), and then click [OK].
4–4
Revision 4
MN/LBC4000.IOM