Client Microphone Input Menu; Client File Recorder - Omnia .9 Installation & User Manual

NFREMOTE CLIENT SOFTWARE CHAPTER 26 |
216

Client Microphone Input Menu

The Client Microphone Input Menu allows you to pick which microphone you'd like to use, a parametric equalizer to create
custom EQ curves for individual mics, and the ability to save and recall custom mic presets. There is also a duplicate button to
the TCP Link Status window and the Display Settings menu for convenience.
Input Device Menu
The Input Device Menu provides a list of available microphones, including built-in mics and any outboard microphones you
may have plugged into the PC running the remote interface software. If you plug in an outboard mic while this window is open,
you may need to tap the "Refresh List" button in order for the software to recognize the addition.
Load Preset Menu
This menu operates in a manner similar to the Load Preset menu in the various processing cores of the Omnia.9. However, the
client software offers an additional Load From button that allows you to call up a preset file from the remote PC, including from
a flash drive or external USB drive.
Save Preset Menu
Just like the Load Preset menu, this operates like its counterparts in other sections of Omnia.9. The Save To button allows you
to save your presets to a location on the remote PC, including a flash drive or external USB drive.

Client File Recorder

Just as it is possible to record audio from various patch points within the processing chain on the actual Omnia.9 itself, you can
also record audio streamed to the client PC. The recorders in the client software work in exactly the same way.