MONITOR OUTPUT MENU
HD-1, HD-2, and HD-3 Patch Points
You can feed each of the three Monitor Outputs audio from various points within any of the HD processing cores.
The I/O menu allows you to listen to either the Program Input, the Loudness Matched A/B patch point, the Digital
♦
Output, the Comparison Output and the Test Input of each HD processing core.
The Undo menu lets you listen to the audio Pre-Declipper, and Post-Declipper, and after the audio has left Undo.
♦
The Undo Expanders lets you listen to the audio of each individual Undo band before it enters the De-clipper and
♦
multiband expander, and after it leaves the De-clipper and multiband expander The available number of bands is
determined by the current processing preset processing core.
The Physical Inputs menu allows you to monitor any of the rear panel input points, including Main Digital, AES
♦
Reference, Aux Digital, and Analog.
The Livewire Inputs menu allows you to monitor any of the 8 Livewire inputs (requires MKII platform update).
♦
The Sidechains menu allows you to monitor the audio passing through the Input AGC, Wideband AGC 1, Wideband
♦
AGC 2, and Wideband AGC 3 sidechains, as well as the actual output audio from each of those stages.
The Multiband menu allows you to individually monitor the audio in each band of the multiband AGC.
♦
CHAPTER 22 |
148