Processing Meters Menu - Omnia .9 Installation & User Manual

FM MENU DISPLAY SETTINGS

Processing Meters Menu

The Processing Meters menu allows you to display the levels and activity of Omnia.9's various gain stages and processing
sections. Here is an example of a typical processing meter indication:
As pointed out in the previous section, you can see here that Display 1 is selected, so only one parameter is being displayed at
this time as well. On the next tier, the Main Meters option is selected, and on the third tier, the Processing Meters option is
selected. As we proceed through the additional metering options, you will see how you can customize your displays exactly as
you like them.
The Delay control, which is also present in (and coupled to) the Processing Meters, Oscilloscope, RTA, and FFT
♦
Spectrum Analyzer menus, lets you synchronize Omnia.9's meters with the audio to which you are listening. For
example, if you are listening to a stream with a 10 second delay, it would be impossible to properly adjust the processing
if that much time passed before you actually heard what you were seeing on the meters! By advancing the Delay control
to 10,000ms, what your eyes see on the meters will coincide with what your ears are hearing. Keep in mind, however, that
any changes you make to the processing will still take 10 seconds to be audible.
CHAPTER 13 |
96