Omnia .9 Installation & User Manual page 210

SYSTEM MENU
Note:
You must also enter the correct password to be able to establish a connection, just as with an outgoing
connection. When you press Connect, NfRemote will enter listening mode.
When NfRemote receives the connection request from the Omnia.9 MKII, the connection handshake will proceed normally,
and the familiar user interface will open.
After you disconnect, Omnia.9 will keep reconnecting forever – rapidly at first, but gradually slowing down, until it idles at
a rate of one connection every four minutes. This means bandwidth use over time will be negligible, but when you need to get
back in, you will have to wait no more than four minutes, and once there's been a successful connection, Omnia.9 will again
reconnect rapidly for a while.
CHAPTER 23 |
193