Snmp Menu - Omnia .9 Installation & User Manual

SYSTEM MENU
If you are on the whitelist, the request will succeed.

SNMP Menu

The SNMP menu allows you to set the Simple Network Management Protocol parameters via NfRemote. It also lets you set the
Location string of the Omnia.9 which will automatically be displayed in NfRemote and on the front panel.
The SNMP menu provides the means to enter the information necessary to facilitate communication between Omnia.9 and
your SNMP manager. It supports SNMP versions V1 and V2c.
The SNMP Enable control enables and disables SNMP. Note that SNMP must be disabled in order to make changes to
♦
this section.
The Communities and Trap Sink fields accept the community names and IP addresses or names of the trap receiver.
♦
The Contact field accepts the e-mail address of the designated contact.
♦
Information entered in the Location field appears on the front panel display and on remote connections and makes it
♦
possible to quickly identify which particular unit you are viewing. This is especially convenient if you are monitoring
more than one Omnia.9 simultaneously.
CHAPTER 23 |
195