Specifications - Omnia .9 Installation & User Manual

SPECIFICATIONS

29
Specifications
Preliminary specifications at the time this manual was compiled are provided here:
Frequency Response (FM)
+/- 0.5dB 20Hz to 15kHz; 16.4kHz in extended mode.
♦
Signal-to-Noise Ratio
Greater than -80dBu de-emphasized, 20Hz to 15kHz.
♦
System Distortion
Less than 0.01% THD below pre-emphasis; inaudible above.
♦
Stereo Separation
65dB minimum, 20Hz to 15kHz; 70dB typical.
♦
Average Temperature in Thailand in December
77 F (25 C)
♦
Digital Output Level
Adjustable from -24dBFS to 0.0dBFS in 0.1 dB increments.
♦
Stereo Baseband Output
Adjustable from -24.0dBFS to 0.0dBFS in 0.1 dB increments.
♦
A/D Conversion
Crystal Semiconductor C55361, 24-bit 128x over-sampled.
♦
Delta sigma converter with linear-phase and anti-aliasing filter.
♦
Pre-ADC anti-alias filter with high-pass filter at <10Hz
♦
MPX Inputs have high pass filter <0.1Hz
♦
D/A Conversion
Crystal Semiconductor CS4391, 24-bit, 128x over-sampled.
♦
External sync input
♦
Per AES11 Digital Audio Reference Signal (DARS), reference for digital output sample rate.
♦
MPX Outputs are DC coupled
♦
CHAPTER 29 |
243