Tree Navigation Mode - Omnia .9 Installation & User Manual

HOME SCREEN & USER INTERFACE

Tree Navigation Mode

By default, Omnia.9 powers up in the Tree navigation mode.
In this mode:
The top portion of the screen is devoted to the display windows.
♦
The bottom portion of the screen shows the buttons or controls for the current tier.
♦
In between these two areas is a navigation bar that shows you exactly where you "are" within Omnia.9, along with
♦
navigation arrow buttons that let you go forward or backward to most places you have visited in the fourth tier.
Selecting and holding down either of the arrow buttons will bring up a list of these places so you can re-visit them
♦
directly.
Double-tapping on any of the controls brings up a magnified view that has two large sliders – one for a "coarse"
♦
adjustment and one for a "fine" adjustment. Some high resolution controls (such as Diversity Delay) have a third slider
labeled "medium". Once you have made your adjustments, tap "Done" to return to the previous display of all the controls
for the tier you're in.
You can make individual portions of the window larger or smaller to devote more or less on-screen real estate to display
♦
windows or control windows by dragging up and down on the re-size bars.
G
A: Client Volume, B: Speaker Volume, C: Headphone Volume, D: Display Presets, E: Resize Bars, F: Navigation Arrows, G: Tier 1
Menu, H: Tier 2 Menu, I: Tier 3 Menu, J: Tier 3 Controls Area
A B
H I
J
C
CHAPTER 4 |
17
D
E
F