Load Preset Menu - Omnia .9 Installation & User Manual

MONITOR OUTPUT MENU

Load Preset Menu

Because Omnia.9 provides all of the tools – minus a calibrated microphone – to perform speaker/room calibrations for each of
the Monitor Outputs, it also provides a way for you to store those calibrated settings in the form of presets.
It is important to remember that this menu refers to presets you create and save yourself for speaker calibrations within each of
the three Monitor Outputs. These are not the same as your processing presets! However, the menus work in the same way.
The Load Preset menu allows you view the preset you are currently feeding to the particular Monitor Output, toggle back and
forth between the current and backup presets, load a new preset, compare the settings of two presets, and delete user presets.
Highlighting a preset from the list places it in the Load button. Selecting the Load button puts that immediately loads
♦
the preset and moves it up to the Current Preset position. The preset that was previously audible will become the Backup
Preset. You may also load a preset directly from the list by double tapping it.
After changing any parameter of a preset, an (M) appears next to the Current Preset name and the text turns yellow to
♦
indicate the preset has been modified but not yet saved.
The Backup Preset also becomes the former (and unmodified) Current Preset. This allows you to toggle back and forth to
♦
hear the difference between the original and modified presets.
Changes to each parameter you adjusted to create the modified preset are also displayed in yellow on the specific control
♦
button in each section of the processing core, providing an instant visual comparison between the modified preset and
the original preset upon which it is based.
You can also compare the differences between the Current Preset and the Backup Preset, providing neither have been
♦
modified, by selecting the Diff Preset button. Any control settings in the Current Preset that are different from those in
the Backup Preset will be displayed in yellow in their respective sections.
Selecting the Delete Preset button allows you to permanently delete a preset from the list.
♦
CHAPTER 22 |
150