Meter Options Menu - Omnia .9 Installation & User Manual

FM MENU METER OPTIONS

Meter Options Menu

Which meters are displayed in the Loudness Meter, Modulation Meter, and Modulation Numeric display windows are
determined by enabling or disabling available options in this menu.
Specifically:
Program Input is available only in the in the Loudness Meter display.
♦
MPX Output, MPX Input 1, MPX Input 2, and Pre-emph Input are available in the Loudness Meter, Modulation Meter,
♦
and Modulation Numeric displays.
The MPX Power Meter, Peak Modulation Meter, Pilot Level Meter, and L/R Level Meter can be added to the Modulation
♦
Meter display of any enabled MPX section, including MPX Output, MPX Input 1, and MPX Input 2.
The MPX Power Numeric, Peak Modulation Numeric, Pilot Level Numeric, and L/R Level Numeric can be added to the
♦
Modulation Numeric display of any enabled MPX section.
The MPX Power Limit control sets the center of the MPX Power meter as well as whether the numeric readout is green
♦
or red. This can be set differently from the MPX Power Limit control in the FM Processing section, and is available even
when Omnia.9 is not operating in MPX Power Mode, to provide a power measurement reference.
You can select as many or as few meter options as you need.
CHAPTER 17 |
121