Physical Inputs - Omnia .9 Installation & User Manual

SIGNAL PATH DIAGRAMS

Physical Inputs

Main Digital Input
(32 - 96 kHz)
AES Reference
Input
(44.1 or 48 kHz)
Reference
(44.1 or 48 kHz)
Aux Digital
Input
(32 - 96 kHz)
Analog
Input
(20 kHz BW)
MPX Input 1
(80 kHz BW)
MPX Input 2
(80 kHz BW)
1
If any AES signal is present on the AES Reference input, that becomes the reference.
The rate of the signal must match the system sample rate (selected on the front panel).
If it doesn't, all I/O will mute, including analog and MPX I/O, as the entire system is
driven from the same (incorrect) clock source.
1
Internal
Rate Quadrupler
Rear Panel Software
I/O Board
Sample Rate
Converter
Sample Rate
Converter
A/D Converter
A/D Converter
A/D Converter
CHAPTER 28 |
229
Main Dig
Patch
Point
To Input
section
AES Ref
Patch
Point
To Input
section
Aux Dig
Patch
Point
To Input
section
Anlg In
Patch
Point
To Input
section
To MPX Input
section
To RDS section
To MPX Input
section
To RDS section