Omnia .9 Quick Start Installation Manual
  1. Manuals
  2. Brands
  3. Omnia Manuals
  4. Recording Equipment
  5. Omnia.9
  6. Quick start installation manual

Omnia .9 Quick Start Installation Manual

Hide thumbs Also See for Omnia.9:
Table of Contents

Advertisement

Quick Links

See also: Operation & Installation Manual , Installer and User Manual
QUICK-START INSTALLATION GUIDE
OMNIA.9
All you can imagine. And more.
INTRODUCTION
We know that you're probably in a hurry to get your new Omnia.9 installed and on the air. If you have
technical expertise and previous knowledge of audio processor fundamentals, this Quick-Start Setup
Guide will get you up and running as quickly as possible.
Please note: because Omnia.9 can be configured in many different ways, (some requiring optional licenses),
not all features and capabilities referenced in this guide or in the full product manual may be available in
your particular unit.
We suggest having an assistant on hand when racking up Omnia.9 to help balance the unit during installation,
and strongly urge using all 4 rack screws since the chassis design requires all four points be mounted.
Although Omnia.9 is fan cooled, leaving an empty rack space directly above and below the unit is advisable.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Omnia.9 and is the answer not in the manual?

Questions and answers

Manuel
February 12, 2025

Hay un pitido

0
1 comments:
Mr. Anderson
February 12, 2025

A beeping sound indicates a failure in one of the power supplies.

This answer is automatically generated

0

Subscribe to Our Youtube Channel

Related Manuals for Omnia Omnia.9

Summary of Contents for Omnia Omnia.9

  • Page 1 All you can imagine. And more. INTRODUCTION We know that you’re probably in a hurry to get your new Omnia.9 installed and on the air. If you have technical expertise and previous knowledge of audio processor fundamentals, this Quick-Start Setup Guide will get you up and running as quickly as possible.

  • Page 2: Initial Startup

    Initial Startup All controls for the Omnia 9 are available via the front panel touch screen. While we consider it far easier to control the Omnia 9 from the NfRemote software as described below, initial control and setup can be done without the unit connected to a network.

  • Page 3: Physical Installation And Initial Configuration

    NfRemote may also be downloaded at any time directly from Omnia.9’s built-in http server once certain conditions are met: • Omnia.9 must be connected to your network and must have an IP addressed assigned to it via the System > System Configuration > IP Configuration menu; DHCP is enabled by default.
  • Page 4 AES signal from 32 – 96kHz. From the Omnia.9 Home screen, select System, then I/O Options, then Input 1, 2 or 3. Each of Omnia.9’s three configurable internal inputs can be fed from any of the physical rear-panel inputs or with Livewire, by using the drop-down menus for each Input Source as appropriate for your installation.
  • Page 5 Mode. Now “FM Pre-emph L/R” and “FM De-emph L/R” will be among the available choices. Output levels are also adjusted here and The AES Main FM Out 1 and/or 2 outputs can be set to output Omnia Direct ™ (MPX over AES/EBU) if desired instead of the default “L/R Audio”.
  • Page 6 If the meters flash red, the input is being overdriven and levels to the Omnia.9 must be reduced. If necessary, it is also possible to invert the polarity of either or both channels with the Invert control.

  • Page 7: General Processing Advice

    GENERAL PROCESSING ADVICE Know Your Goals The first step to successful processing – and this applies to ANY processor, not just Omnia.9 - is defining your goals. Whatever those goals are, Omnia.9 is capable of getting you there. You may wish to maintain as much quality as possible while increasing loudness somewhat over your existing processor.

  • Page 8: Making And Saving Changes

    (or guess) what changes you’ve made along the way. • Once you are familiar with the Omnia 9 and have it on air, consider tuning it live from your car using NfRemote. Many of our power users recognize that the car is the often the best “stereo” people own, and where they spend the most time listening.

  • Page 9: Troubleshooting (Faq)

    Omnia.9 was designed to be installed in a typical rack room or transmitter site where noise is not an issue. Omnia.9 utilizes four internal fans to provide cooling to the unit: One on the main CPU, one on the front left side of the unit, and one in each power supply.
  • Page 10 For those who want to hear a processed headphone mix, a dedicated low-latency Studio processing core is provided for talent monitoring. This can be used if Omnia.9 is located at the studio, or if a suitable low- delay return path is available from the transmitter site.

  • Page 11: Obtaining Service

    OBTAINING SERVICE OBTAINING SERVICE Before contacting Omnia Customer Support, please have the serial number of the unit (located on a small barcode sticker on the rear panel in this format - “0279xyyyy) and a description of the symptoms/ problems ready for the technician.

  • Page 12: Quick Links

    Google+: +TelosAlliance Product Catalog TelosAlliance.com/now 24/7 Tech Support +1 (216) 622-0247 support@telosalliance.com 1241 Superior Ave. • Cleveland, Ohio, 44114, USA • +1.216.241.7225 • TelosAlliance.com © 2018 TLS Corp. The Telos Alliance®. All Rights Reserved. C18/15068 1490-00107-000 --- QUICK START GUIDE: OMNIA.9...

Table of Contents