Table of Contents
Advertisement
4.1 Conformance with UL/cUL
Planned.
4.2 Conformance with EC Low Voltage and EMC Directives
CE Declarations of Conformity can be found on the Kollmorgen website.
Conformance with the EC EMC Directive 2004/108/EC and the Low Voltage Directive
2006/95/EC is mandatory for the supply of drives within the European Community.
The drives have been tested by an authorized testing laboratory in a defined configuration,
using the system components that are described in this documentation. Any divergence from
the configuration and installation described in this documentation means that the user will be
responsible for carrying out new measurements to ensure conformance with regulatory
requirements.
Kollmorgen declares the conformity of the product series AKD-Nzzz07 with the following dir-
ectives:
EC Directive 2006/95/EC, low voltage
l
Used harmonized standard EN61800-5-1 (2007)
EC Directive 2004/108/EC, electromagnetic compatibility
l
Used harmonized standard EN 61800-3 (2004)
The AKD-Nzzz07 meet the noise immunity requirements to the 2nd environmental category
(industrial environment). For noise emission theAKD-Nzzz07 meet the requirement to a
product of the Category C2 (motor cable up to 5 m).
These devices can cause high-frequency interferences in non industrial environments and
may require measures for interference suppression (such as additional external EMC filters).
4.3 Conformance with EC Machinery Directive, Functional Safety
Conformance with the EC Machinery Directive 2006/42/EC is mandatory for the supply of
safety components within the European Community.
Safe Torque Off (STO) string type
Certification in process.
Safe Torque Off (STO) single drive type
Certification in process.
AKD-N Installation | 4 Approvals
Kollmorgen | December 2014
17
Advertisement
Table of Contents
