KPA080 Ku-Band Solid-State Power Amplifier
About this Manual
This manual provides installation and operation information for the Comtech EFData
KPA080 Ku-Band Solid-State Power Amplifier. This is a technical document intended
for earth station engineers, technicians, and operators responsible for the operation and
maintenance of the KPA080.
Conventions and References
Cautions and Warnings
CAUTION
WARNING
Safety Notices
This equipment has been designed to minimize exposure of personnel to hazards. The
operators and technicians must:
CAUTION
WARNING
Rev. 0
CAUTION indicates a hazardous situation that, if not avoided, may result in
minor or moderate injury. CAUTION may also be used to indicate other
unsafe practices or risks of property damage.
WARNING indicates a potentially hazardous situation that, if not avoided,
could result in death or serious injury.
• Know how to work around, with, and on high voltage and high RF power
level equipment.
• Exercise every precaution to ensure personnel safety.
• Exercise extreme care when working near high voltages/high RF power
level equipment.
• Be familiar with the warning presented in this manual.
• Disconnect the power supply cord before servicing the SSPA.
Lithium Battery Replacement: There is a damage that the Lithium battery
on the M&C assembly will explode if the battery is incorrectly replaced.
Replace only with the same or equivalent type battery recommended by the
manufacturer. Dispose of used batteries according to the Lithium battery
manufacturer's instructions.
Preface
vii
Need help?
Do you have a question about the KPA080 and is the answer not in the manual?
Questions and answers