Gain Equalization Of Redundant Units; Figure 4-2. Control Cabling Of A 1:2 System - Comtech EF Data KPA080 Installation And Operation Manual

KPA080 Ku-Band Solid-State Power Amplifier
4.2.1

Gain Equalization of Redundant Units

Typical procedures to equalize the gain between the Backup Unit and the Online Unit(s)
via the Gain Offset adjustment in the backup unit's CONFIGURATION Menu are as
follows:
Note: Make sure all connections are made as outlined previously in Sections 2 and 4.)
Determine the relative gain of the Backup Unit vs the Online unit(s).
Rev. 0

Figure 4-2. Control Cabling of a 1:2 System

Redundant Configuration
4-3