Chapter 2. Installation; Unpacking - Comtech EF Data KPA080 Installation And Operation Manual

This chapter describes the instructions for unpacking and installing the KPA080-4045-I
Ku-Band Solid State High Power Amplifier
2.1

Unpacking

Perform a receiving inspection as follows:
•
Inspect the shipping container for damage. The shipping container and packing
materials should be retained for possible reshipment.
•
Check to determine that all parts, materials and documentation have been shipped
with the SSPA. The SSPA should be inspected for possible damage, and then tested
for proper operation.
•
If the shipment exhibits any of the following, contact Comtech EFData Customer
Support:
♦ Incomplete
♦ Mechanical damage
♦ Inoperable
If there is damage to the shipping container, notify the carrier. Retain all shipping
materials for inspection by the carrier.
Rev. 0
2
Chapter 2.
INSTALLATION
2-1