1
Level
3.3.4 Installing the optional heat exchanger
Figure 9 Instrument leveling
An optional heat exchanger (Cat. No. 48551-00) is available for the
SS7 sc-HST
(Figure 10 on page
sample temperatures that exceed the temperature requirements of
the instrument. It can reduce sample temperatures of up to 100 °C
but is not suitable for steam or super-heated water. A source of
cooling water is required. The heat exchanger is made of 316
stainless steel and has ¾" MNPT pipe connections. The large
plumbing connections help eliminate clogging.
•
Allow adequate space below and to the right (latch) side of the
sample unit to make hydraulic connections.
•
See
Figure 10 on page 20
•
See
Figure 12 on page 22
Installation
20). The heat exchanger reduces
for installation dimensions.
for heat exchanger connections.
19