Connection Panel (Bottom Of Instrument); Panel Mount Instrument; Instrument Dimensions - Hach ORBISPHERE 410 User Manual

3.3.4 Connection panel (bottom of instrument)

Front panel door
A square key is provided to open the instrument front panel locks. The two locks are located on
the right side of the instrument on the top and bottom panels (number 8 in
The front panel can be easily pivoted to the left as shown below. To retain the instrument
waterproof tightness, make sure the seal is clean and in good condition before closing the front
panel.
1. Power cable. The type of connection will
2. USB-B 4 pin connector (reserved for
3. Ethernet cable gland

3.4 Panel mount instrument

3.4.1 Instrument dimensions

vary depending on the instrument
specification. Refer to Connection to
mains power supply on page
manufacturing)
Figure 4 Wall and pipe mount connection
4. Sensor cable gland
5. USB-A host connector for mass storage
device
26.
6. Input/Output 2 cable gland
7. Input/Output 1 cable gland
8. Keylock (bottom panel)
Installation
Figure 4 below).
panel
21