Led Display - Kollmorgen AKD series Installation Manual

AKD Installation | 8 Electrical Installation

8.15 LED display

The LED seven-segment display indicates the status of the drive after the 24 V supply is switched on. If the serv-
ice connection to the PC or to the PAC doesn't work, then the LED display is the only way to get information.
AKD two digits
AKD fault codes or warning codes are displayed
constantly if present. Fault messages are coded
with "F", warnings are coded with "n". The IP
address can be flashed across the LED display if
the B1 button is pressed.
128 Kollmorgen™ | March 2012
AKD-M two + one digits
The two digits LED display indicates the AKD messages.
Fault messages are coded with "F", warnings are coded
with "n".
The one digit LED indicates the PDMM messages of the
AKD PDMM. Error messages are coded with "E", warn-
ings (alarms) are coded with "A". Status of application pro-
grams are indicated as well. With pushbuttons B2 and B3
a menu with several functions can be started (=> p. 129).