Disclaimer; Electrical; Optical Radiation - Sutter Instrument LB10-3 Operation Manual

DISCLAIMER

DISCLAIMER DISCLAIMER DISCLAIMER
The Lambda 10 Lambda 10 Lambda 10- - - - 3 3 3 3 is an optical filter switcher and shutter controller designed for the specific Lambda 10
use of changing filters into and out of an optical pathway and no other use is recommended.
This instrument is designed for use in a laboratory environment. It is not intended, nor
should it be used in human experimentation or applied to humans in any way. This is not a
medical device.
Do not open or attempt to repair the instrument. Extreme heat and high voltages are present
and could cause injury.
Do not allow unauthorized and/or untrained operative to use this device.
Any misuse will be the sole responsibility of the user/owner and Sutter Instrument Company
assumes no implied or inferred liability for direct or consequential damages from this
instrument if it is operated or used in any way other than for which it is designed.
SAFETY WARNINGS AND PRECAUTIONS SAFETY WARNINGS AND SAFETY WARNINGS AND SAFETY WARNINGS AND

Electrical

Electrical
Electrical Electrical
Operate the Lambda 10- - - - 3 using 110 Operate the Lambda 10
Operate the Lambda 10 Operate the Lambda 10
voltage. voltage. This instrument is designed for connection to a standard laboratory power outle This instrument is designed for connection to a standard laboratory power outlet t t t
voltage. voltage. This instrument is designed for connection to a standard laboratory power outle This instrument is designed for connection to a standard laboratory power outle
(Overvoltage Category II), and because it is a microprocessor (Overvoltage Category II), and because it is a microprocessor-- -- -- --controlled device, it should
(Overvoltage Category II), and because it is a microprocessor (Overvoltage Category II), and because it is a microprocessor
be accorded the same system wiring precautions as any 'computer type' system. A surge be accorded the same system wiring precautions as any 'computer type' system. A surge
be accorded the same system wiring precautions as any 'computer type' system. A surge be accorded the same system wiring precautions as any 'computer type' system. A surge
protector and power regulator are recommended. protector and power regulator are recommended. protector and power regulator are recommended. protector and power regulator are recommended.
Fuse Replacement: Fuse Replacement: Replace Fuse Replacement: Fuse Replacement:
T3.15A, 250V, 5 x 20mm, Time Delay fuse T3.15A, 250V, T3.15A, 250V, T3.15A, 250V,
(Examples: Bussmann GDC (Examples: Bussmann GDC (Examples: Bussmann GDC (Examples: Bussmann GDC- - - - 3.15A or S506
A spare fuse is located in the power input module. Please refer to the fuse A spare fuse is located in the power input module. Please refer to the fuse A spare fuse is located in the power input module. Please refer to the fuse- - - - replacement A spare fuse is located in the power input module. Please refer to the fuse
appendix for more details on fuse ratings and for instructions on how to change the fuse. appendix for more details on fuse ratings and for instructions on how to change the fuse. appendix for more details on fuse ratings and for instructions on how to change the fuse. appendix for more details on fuse ratings and for instructions on how to change the fuse.
Avoiding Electrical Shock and Fire Avoiding Electrical Shock and Fire- - - - related Injury
Avoiding Electrical Shock and Fire Avoiding Electrical Shock and Fire
Always use the grounded power supply cord set provided to connect the system to a Always use the grounded power supply cord set provided to connect the system to a
Always use the grounded power supply cord set provided to connect the system to a Always use the grounded power supply cord set provided to connect the system to a
grounded outlet (3 grounded outlet (3- - - - prong). This is required to protect you from injury in the event th
grounded outlet (3 grounded outlet (3
an electrical hazard occurs. an electrical hazard occurs. an electrical hazard occurs. an electrical hazard occurs.
Do not disassemble the system. Refer servicing to qualified personnel. Do not disassemble the system. Refer servicing to qualified personnel.
Do not disassemble the system. Refer servicing to qualified personnel. Do not disassemble the system. Refer servicing to qualified personnel.
To prevent fire or shock hazard do not expose the unit to rain or moisture. To prevent fire or shock hazard do not expose the unit to rain or moisture. To prevent fire or shock hazard do not expose the unit to rain or moisture. To prevent fire or shock hazard do not expose the unit to rain or moisture.

Optical Radiation

Optical Radiation Optical Radiation Optical Radiation
This system is designed for use in conjunction with high- - - - intensity light sources. Failure to This system is designed for use in conjunction with high This system is designed for use in conjunction with high This system is designed for use in conjunction with high
comply with any of the following precautions may result in injury to the users of this device comply with any of the following precautions may result in injury to the users of this device comply with any of the following precautions may result in injury to the users of this device comply with any of the following precautions may result in injury to the users of this device
as well as those working in the general area as well as those working in the general area near the device. as well as those working in the general area as well as those working in the general area
PRECAUTIONS PRECAUTIONS PRECAUTIONS
3 using 110- - - - 120 V AC, 60 Hz, or 220 120 V AC, 60 Hz, or 220- - - - 240 V AC., 50 Hz line
3 using 110 3 using 110 120 V AC, 60 Hz, or 220 120 V AC, 60 Hz, or 220
Replace Replace Replace only with the same type and rating: only with the same type and rating: only with the same type and rating: only with the same type and rating:
5 x 20mm, Time Delay fuse 5 x 20mm, Time Delay fuse (IEC 60127 5 x 20mm, Time Delay fuse
Littelfuse 218 3.15 or 218 3.15P (RoHS)) Littelfuse 218 3.15 or 218 3.15P (RoHS)) Littelfuse 218 3.15 or 218 3.15P (RoHS)) Littelfuse 218 3.15 or 218 3.15P (RoHS))
related Injury
related Injury related Injury
prong). This is required to protect you from injury in the event that at at at
prong). This is required to protect you from injury in the event th prong). This is required to protect you from injury in the event th
LAMBDA 10-3 OPERATION MANUAL – REV. 3.03 (20110829)
240 V AC., 50 Hz line
240 V AC., 50 Hz line 240 V AC., 50 Hz line
(IEC 60127- - - - 2, Sheet III) (IEC 60127 (IEC 60127
3.15A or S506- - - - 3 3 3 3 .15R (RoHS); or 3.15A or S506 3.15A or S506 .15R (RoHS); or .15R (RoHS); or .15R (RoHS); or
intensity light sources. Failure to intensity light sources. Failure to intensity light sources. Failure to
near the device. near the device. near the device.
controlled device, it should
controlled device, it should controlled device, it should
2, Sheet III) 2, Sheet III) 2, Sheet III)
replacement replacement replacement
iii