Prior Scientific ProScan III Manual page 80

ProScan® III Manual
It is important to select the correct COM Port to allow the system to function. This is
done by clicking 'Com', which also allows the baud rate to be changed. The default setting
of the controllers is 9600; however some software can change this. Once Prior Terminal
is open, to list what hardware is connected type '?'. From the product manual you should
see the correct response this should generate. For example, from the ProScan III one
might get the response:
PROSCAN INFORMATION
DSP_1 IS 3-AXIS STEPPER VERSION 0.0
DSP_2 IS 3-AXIS STEPPER VERSION 0.0
DRIVE CHIPS 111111
JOYSTICK NOT FITTED
STAGE = H101AENC
FOCUS = FB20X
FOURTH = NONE
© Prior Scientific Instruments Ltd Version 1.12 June 2017
'COM' button
Logs comms traffic
Create, edit and run
scripts
Clears display
Create a new, delete, or
select an active button
group
Double click here to re
execute a command, and
right click here to change
text size.
Type here to enter
commands
Right click here to add
buttons, and left click a
button to execute. Right
click deletes.
Page 78