Prior Scientific ProScan III Manual page 24

ProScan® III Manual
Type in the step size (distance travelled) in microns and click ok.
Focus Move Area:
Click buttons to move focus set distances (default 10µm).
Go To Zero: move the focus to absolute zero.
Right click with mouse on either 'up' or
'down' to set the distance the focus will
travel.
Type in the step size (distance travelled) in
microns and click ok.
Status Area:
F6,F5,F4,F2,F1,F3/A,Z,Y,X. 0010011 indicates the Filter 1, X and Y are moving, for
example.
Limits: Displays eight digits, one for each end of each axis, 0 is not active 1 is limit active.
All digits are always displayed in the following order: A-, A+, Z-,Z+,Y-,Y+, X-,X+.
Shutters Area:
© Prior Scientific Instruments Ltd
Temperature: Chip temperature is displayed if available.
Voltage: Drive voltage is displayed.
Moving: Displays nine digits, one for each axis, 0 if the axis is
stationary and 1 if it is moving.
All digits are always displayed in the following order:
Version 1.12 June 2017 Page 22