Prior Scientific ProScan III Manual page 34

ProScan® III Manual
Reference Menu:
Set Index of Stage: Unencoded: Moves stage to X+ and Y+ limits (Forward and right) and
sets position as 0,0.
Encoded: Moves stage to X+ and Y+ limits, (Forward and right) and sets motor count to
0, then returns the stage to reference points on encoders and set position 0.
Restore Index of stage: Completes a Set Index of Stage move then returns the stage
to the position it was originally at.
Set Index Z (Requires Z limits): Moves the focus to Z+ limit and sets motor count to 0.
Restore Index of Z: Completes a Set Index of Z then moves the focus to the position
it was originally at.
Correction Menu:
Full Stage Mapping: Check to enable Full stage mapping. (Set Stage Index must be complete
on startup and stage must be enabled with All point mapping).
4-point Stage Correction: Check to enable IST stage correction.
Skew Correction: Enables Basic Skew correction using the parameters from Skew Angle,
Skew About and Skew Second.
© Prior Scientific Instruments Ltd Version 1.12 June 2017 Page 32