Prior Scientific ProScan III Manual page 22

ProScan® III Manual
See below for information on how to use the different menus in this software.
Digital Readout with Encoders:
© Prior Scientific Instruments Ltd
X is the X position (in microns)
Y is the Y position ( in microns)
Z is the Z position (in microns, if the UPR is set
correctly for the microscope)
Zero Position Button: Zero's all three positions, all previous
positional information is lost.
Go to Abs Button:
Type the X Y and Z position you require and Press 'Goto'.
Moves the X Y and Z to the absolute X Y and Z position.
X value using encoder (Based on the encoder settings)
Y value using encoder (Based on the encoder settings)
No z-encoder fitted, Z position. (in microns, if the UPR is
set correctly for the microcope).
Version 1.12 June 2017 Page 20