Prior Scientific ProScan III Manual page 42

ProScan® III Manual
Click Start Points
On all patterns now click Run.
If auto step off click 'Next' to move through the positions.
If autostep on click 'Next' to start pattern.
Click 'Save Point' and 'Next' to store the current point.
When exiting you will be prompted to save any unsaved patterns.
To enable the TTL pulse on pattern move or to have a TTL signal while the stage is
moving, see the TTL section above.
© Prior Scientific Instruments Ltd
Add the points and order them in the pattern
required. You can add or remove points from the
User pattern. Only point in the Start points will
be used in the pattern.
Click OK once complete.
Version 1.12 June 2017 Page 40