Prior Scientific ProScan III Manual page 23

Digital Readout with encoder fitted but disabled:
Stage move area:
Right click with mouse on one of the buttons to set the distance travelled.
© Prior Scientific Instruments Ltd
X is the X position (in microns)
EncX: X encoder position
Y is the Y position ( in microns)
Enc Y: Y encoder position
Z is the Z position (in microns, if the UPR is set correctly for the
microscope)
Measurement Area:
X distance from marked position to current position.
Y distance from marked position to current position.
Diagonal distance from marked position to current position.
Click 'Mark' to make current position marked position.
Click buttons to move stage set distances (default 1000um).
Back, Forward (Y)
Left, right (X)
Version 1.12 June 2017
ProScan® III Manual
Page 21