Prior Scientific ProScan III Manual page 25

4th
Filters/ Axis:
Greyed out buttons show that no accessory is detected.
Filter Wheels:
Lumen Attenuator:
'Auto Cycle', click to automatically cycle the unit through 0-100% light output, Click
cancel to stop.
Bulb Power: Switches entire Lumen On/Off
© Prior Scientific Instruments Ltd
Click the appropriate button to Open or Close an
attached shutter. If the button is greyed out the shutter is
not detected.
Check the Close shutter during filter move to close all
shutter when any attached filter wheel is moved.
Click the appropriate button to open another
window to access the Filter Wheel, Lumen
Attenuator ('LLG Shutter'), or 4
Click 'Next' to move the next filter wheel
position. Click 'Previous' to move the
previous filter wheel position. Click 'Home'
to home the Filter wheel. Check the 'Home
on start', to activate the home on startup
feature which will automatically home the
filter wheel when the ProScan unit is
powered on.
Use the scroll bar to set the light output level from 0
to 100%.
Click the 'Home Shutter' to home the shutter; this
should be done on start-up.
Version 1.12 June 2017
ProScan® III Manual
Accessory ('Theta').
th
Axis
Page 23