Table of Contents
Advertisement
60
Note: You can configure the field and decimal separator characters of the CSV file in
Setup – Regional. This is often required because the settings have to match in order
to import the file to Microsoft Excel, for example.
Setup and configuration
SREA-01 is configured by using the Configuration and Setup pages. The difference
between the Configuration and Setup pages is that the Setup pages are used to
configure the SREA-01 platform while the Configuration pages are used to describe
which drives are connected and how they should be monitored and logged.
The Setup pages are used for configuring
• the user accounts of the web pages and contact information of the users for
sending E-mails and SMS messages,
• the Modbus settings that are used when communicating with drives,
• the settings of an optional GSM/GPRS/analog modem,
• time, date and regional settings,
• E-mail sending options,
• SNMP alarm options,
• web server and page display options,
• FTP upload options,
• Ethernet network options, such as the IP address.
In addition the Setup pages can be used to backup the settings of SREA-01 and to
upgrade the firmware.
The Configuration pages are used for configuring
• templates, which are available drive model information files,
• devices, which are connected drives,
• pages, which are customizable views of drive parameters and actual values,
• alarms, which are actions that happen when a special event occurs,
• logger, which stores data from drives into a file.
• bindings, which are data relays between drives.
For more information about configuring the settings, refer to the next chapters.
User interface
Advertisement
Table of Contents
