Table of Contents
Advertisement
Alarm
When there are alarms present in the system, the 'Alarm' selection of the main menu
bar appears red. The list of alarms and their states can be accessed by clicking the
'Alarm' selection.
The Alarm page shows all active and unacknowledged alarms. It is also possible to
select to view the status of all configured alarms. Use the 'show all' button in the
lower left area of the screen to toggle between the two modes.
A list of previously occurred alarms can be shown by selecting Alarm history from
the sub menu bar.
If the alarm acknowledgements are enabled on the alarm configuration page, the
alarm has to be acknowledged on the alarm page by pressing the 'acknowledge'
button. Before acknowledging the alarm, new alarm E-mails or SMS messages
regarding that alarm are not sent even if the alarm goes temporarily off and then on
again. All active alarms can be acknowledged by pressing the 'acknowledge all'
button.
For more information about alarm classes, severities and other alarm properties,
refer to the section
Log
From this page it is possible to download the log file from SREA-01, provided that
logging has been enabled. Simply click the 'download' button to download/view the
Alarm
on page 84.
57
User interface
Advertisement
Table of Contents
