Table of Contents
Advertisement
47
The drive configuration button is a shortcut for selecting Configuration – Devices.
The drive configuration page can be used to add or remove drives and alter the
information of each drive.
Drive information page
The drive information page shows information of a single drive. It is the default start-
up page if only a single drive is connected to SREA-01.
The page shows the name of the drive, its model, how the drive is connected to
SREA-01 and the status of the drive. In addition the page can display additional
information text and a drive picture if the user has specified them in the Device
configuration. The faults section shows five latest fault events of the drive.
The drive information page only shows information. The texts and values can be
altered on the Device configuration page, see section
Devices
on page 78.
You can access the other pages of the drive – the actual values page, the
parameters page and the faults page – by selecting them from the sub menu below
the main menu.
User interface
Advertisement
Table of Contents
