Table of Contents
Advertisement
Regional
The Regional page contains configuration for time and date, generic module
information and also configuration for how the log file list separator and decimal
symbol should be represented.
Time and date
This configures the real-time clock on the module. The clock will continue to work
during power-loss (max. 1 week). To use NTP (Network Time Protocol) for
synchronizing the clock, enable it and enter an NTP-server (or use the default
configuration). Also set the update interval (how often NTP will synchronise the
time).
Decimal separator
List separator - Can be either colon (,) or semi-colon (;).
Decimal Symbol – Can be either dot (.) or colon (,).
The list separator and decimal symbol should be selected so it matches the
configuration on the computer where the log files will be analysed.
Module information
The "Site name" string can be used to add information about where the module is
located (address, building ID etc.). This information will be shown on all page
69
Setup pages
Advertisement
Table of Contents
