Devices - ABB SREA-01 User Manual

78
To support a certain drive, SREA-01 must contain the correct template file.
Unnecessary templates can be deleted from the module to save memory and
likewise additional template files can be uploaded to add support for more drive
models. Not all ABB drives are supported by SREA-01 by default. For some simple
special cases, custom templates can also be created. For more information on
creating a template from scratch, see chapter
templates for unsupported
If you have received an additional template file for your drive from ABB, press the
'upload template button' to upload it to SREA-01 from your PC. From the pop-up
window that appears, choose 'Browser', select your template file and press 'upload
template'. The new template should be added to the Device Templates list.
The backup and restore buttons can be used to save the template file to the PC and
restore it back to SREA-01.

Devices

The Device Configuration page is used to specify the drives that are connected to
SREA-01. The page can be accessed by clicking the Devices selection in the
Configuration sub-menu or by pressing the 'drive configuration' button on the Drive
Summary page.
Configuration pages
Appendix C: Creating custom device
devices.