Table of Contents
Advertisement
68
Options: When current connection fails the SREA-01 keeps the modem
communication as primarily connection method after loosing the Ethernet
communication. Other options are 5 minutes, 30 minutes, 2 hours and 8 hours.
Host to ping – address to the host that SREA-01 will ping when sending keep-alive
messages for the GPRS connection.
Ping timer – Specifies the interval for the keep-alive messages. (Set value as high
as possible to avoid unnecessary GPRS traffic.)
Access Point Name (APN) – This is the gateway for all GPRS traffic. Contact your
GSM/GPRS operator for information about this.
Phone number – Phone number to dial (eg, to an Internet Service Provider, ISP).
User name – This is the user name your ISP has assigned to you.
Password – Password to log in the ISP network.
Dial-in settings
The dial-in functionality can be used when someone wants to view the web pages of
SREA-01 over a modem link.
Local IP address – This is the IP-number of the SREA-01, which the remote client
will see when creating the PPP-connection.
Remote IP address – This is the IP-number that will be assigned to the remote
client when creating the PPP-connection.
User name – This is the login that the remote client will use when creating the PPP-
connection.
Password - This is the password that the remote client will use when creating the
PPP-connection.
Setup pages
Advertisement
Table of Contents
