Ip Address - Cisco Nexus 7000 Series Command Reference Manual

Chapter 1 Cisco Nexus 7000 Series IP SLAs Commands

ip address

To specify a primary IP address for an interface, use the ip address command. To remove the default
settings, use the no form of this command.
Syntax Description
ip-address-mask
Command Default None
Command Modes Global configuration mode (config)
Command History Release
6.2(2)
Usage Guidelines This command does not require a license.
Examples This example shows how to specify a primary IP address for an interface:
switch(config)# interface ethernet 2/1
switch(config-if)# ip address 10.2.2.1 255.255.255.0
switch(config-if)#
Related Commands Command
ip sla schedule
ip sla group schedule
show ip sla
configuration
show ip sla statistics
show ip sla statistics
aggregated
OL-27555-03
ip address ip-address-mask
no ip address ip-address-mask
IP address. The IP address format is i.i.i.i.
Modification
This command was introduced.
Description
Configures the scheduling parameters for a single IP SLAs operation.
Configures the group scheduling parameters for multiple IP SLAs
operations.
Displays configuration values including all defaults for all IP SLAs
operations or the specified operation.
Displays the current operational status and statistics of all IP SLAs
operations or a specified operation.
Displays the aggregated statistical errors and distribution information for all
IP SLAs operations or a specified operation.
Cisco Nexus 7000 Series NX-OS IP Service Level Agreements (SLAs) Command Reference
ip address
1-19