FARGO electronics DTC510 User Manual page 66

RESTRICTED USE ONLY
Troubleshooting the LCD Messages (continued)
Message
Card Jam
Card Jam: Flipper Indicates that a card is
Card Jam: Print
Card Jam: Mag
Card Jam: Smart
Data Input
Data Timeout
DRAM Memory
Error
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
Cause
Indicates that a card is
jammed in the Print Station or
card flipping area of the
Printer.
jammed in the card flipping
area of the Printer.
Indicates that a card is
jammed in the Print Station
of the Printer.
Indicates that a card is
jammed in the magnetic
encoding area of the Printer.
Indicates that a card is
jammed in the Smart Card
encoding area of the Printer.
Indicates that the print data
sent to the Printer is corrupt
or has been interrupted.
Indicates that the print data
sent to the Printer is corrupt
or has been interrupted.
Indicates that the Printer's
Memory Module is bad or is
not installed properly.
Fargo Electronics, Inc.
Solution
See Card Feeding Errors in Section 2,
page 86.
See Resolving cards jamming on the
Flipper table in Section 2, page 89.
See Card Feeding Errors in Section 2,
page 86.
See Removing the Card jam in the
Printer's Magnetic Encoding Area in
Section 2, page 96.
See Removing the Card jam in the
Printer's Smart Card Encoding Area in
Section 2, page 97.
See Resolving the Communication
Errors in Section 2, page 81.
See Resolving the Communication
Errors in Section 2, page 81.
See Resolving the DRAM Memory
Error in Section 7, page 247.
Continued on the next page
66