FARGO electronics DTC510 User Manual page 40

RESTRICTED USE ONLY
Printer Components: LCD and Softkey Control Pad (continued)
Component Description
The Cancel Use this button to cancel print jobs and reset the Printer for the next print
button job.

option from the Printer driver before sending the next print job. If a card is
left within the Printer after a print job is canceled, it will automatically be
ejected.
Pause button Use this button to pause the Printer at any time during operation. (Note:
The Printer will always finish its current task before pausing. When the
Printer is paused, the LED light will flash and the Pause softkey button
will change to Resume.)
Press Resume to continue Printer operation.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
This Cancel function will cancel all print jobs in the Printer and will
completely reset the Printer. In this case, be sure to cancel the print
jobs from the PC before pressing YES.
Caution: To avoid this, select the Print in Single Card Mode
Fargo Electronics, Inc.
Continued on the next page
40