FARGO electronics DTC510 User Manual page 304

RESTRICTED USE ONLY
Upgrading the Firmware to Version 1.5.1 (continued)
Step Procedure
3 Prepare the PC.
a. Insert the DTC5XX Firmware Update Disk into the Computer's Diskette
Drive.
b. In Windows, open the Firmware Updater Program from the Windows Start
Menu, as shown below.
c. Click on the Select Update File button, as shown below.
d. Navigate to the 5DTC151.S19 Firmware file on the diskette. Select it and
click on Open.
e. Click on Select Printer button, as shown below.
f. Select DTC510-515/ DTC520-525 and click on OK.
DTC500 Series Card Printer/Encoders User Guide (Rev. 5.0)
Fargo Electronics, Inc.
Continued on the next page
304