Size And Display Position Of A Window; Changing The Displaying Order Of Windows - Omron NT31 Operation Manuals

Inputting Character Strings
Opening/Closing and moving a window by the operation of window control area
7-14-5

Size and display position of a window

7-14-6

Changing the displaying order of windows

442
While running the NT31/NT31C, by writing window screen number or X, Y coordi-
nate of window position (bottom left) at window control area from the host, open-
ing/closing, moving window are possible.
Window control area can control both global window and local window. For details,
refer to 8--4 "Display and Control of Window" (page 490).
NT31/NT31C
Local window 1 open
(Window screen No.125)
Bottom left coodinate (60, 179)
Size of a window can be specified freely by 20 dot unit when creating a window
screen. (Minimum window size: 20
It is possible to display a window at a different position from where it was created,
or to move a window. (Distance of movement has to be multiple of 20 also.)
Example:
Orginal position Destination Position
Move
Multiple of 20
Multiple of 20
When multiple windows are displayed on a base screen, the part of the windows
may overlap with each other. To move a window which is covered by the other
window to the front, follow the methods below.
S Changing the displaying order by opening or moving operation of the window
The window which was opened or moved last comes to the front.
Pop-up window/keyboard
Window opens
touch switch
Open
Window already opened
PC
Window control area
0125
Screen No.
Local window 1
0060
X coordinate
0179
Y coordinate
20)
Section 7-14