Various System Settings
Set the buzzer sound by following the menu operation from the System Menu
shown below.
To set other memory switches, select the relevant screen using the [ ] (next
screen) or [ ] (previous screen) touch switch, then make the setting.
S To confirm the settings and quit the memory switch setting screen, press the
"Quit" touch switch. The settings made last will be set and the NT31/NT31C will
return to the "MAINTENANCE MODE MENU" screen.
S To quit the memory switch setting screen without confirming the settings, press
the "Abort" touch switch. The NT31/NT31C will return to the "MAINTENANCE
MODE MENU" screen with the previous settings still in effect.
Select "Maintenance Mode".
Select "Memory Switch".
Press "Buzzer Sound" to display "ON",
"OFF", or "ERROR ON".
The setting option changes each time the
touch switch is pressed.
Section 6-9
193