Omron NT31 Operation Manuals page 361

Touch Switches
350
The attributes for the window key are as follows.
Settings
Screen No.
Local 1
(Keyboard)
Local 2
Window Position
X
Y
Action Type
Replace Local
Window
The window behaves as follows according to the settings for "Action Type" and
"Replace Local Windows".
- Behaviour according to the "Action Type"
Open : Opens the specified window by the specified type (local 1 or local 2).
Whether or not the window is actually opend depends on the display
status and the setting for "Replace Local Window".
The window is displayed at the position which is specified with the
"Window Position" setting.
If the other window of the same type is already opened, the
behaviour is determined according to the setting for "Replace
Local Window".
If the specified window does not exist, no operation is performed.
Close : Closes the specified window of the specified type (local 1 or local 2).
When the "close" window key is pressed, the specified window
which is presently displayed by the specified type is closed.
If the specified window is not displayed by the specified type, no
operation is executed.
Toggle : Opens or closes the specified window of the specified type
(local 1 or local 2).
If the specified window is not displayed by the specified type, the
specified winodw is opened in the same way as the "Open"
window key.
Whether or not the window is actually opened depends on the
display status and the setting for "Replace Local Window".
The window is displayed at the position which is specified with
the "Window Position" setting.
If the other window of the same type is already opened, the
behaviour is determined according to the setting for "Replace Local
Window".
If the specified window does not exist, no operation is performed.
If the specified window is already displayed by the specified type, the
window is closed in the same way as "Close" window key.
- Behaviour according to the "Replace Local Window"
Chek mark : If the other window of the same type is already displayed,
the displayed window is closed first, and then the specified
window is opened.
No check mark : If the other window of the same type is already displayed, no
operation is performed.
Check this attribute when the local window 1 is to be
controlled.
S Specify the screen number of the window to be
controlled.
1 to 3999
Check this attribute when the local window 2 is to be
controlled.
S Specify the screen number of the window to be
controlled.
1 to 3999
X coordinate at the bottom left position of the window
0 to 300 (multiple of 20)
Y coordinate at the bottom left position of the window
19 to 239 (multiple of 20-1)
Controlling method of the window
Open/Close/Toggle
Specify the behaviour of the window when the other window
of the same type (Local 1/Local 2) is already opened.
Check mark (replace)/No check mark (no replace)
Section 7-7