Omron NT31 Operation Manuals page 598

Commands/Responses
9-3-14 Bit memory table clear command
Command
[Format]
Reference: The maximum number which can be specified for bit memory table depends on the
Response
[Format]
[Function]
C B
[ESC]
1B 43 42
* *
(e1) (e2) (e3)
* * * * * *
m : Check sum present/absent (1 BCD digit)
0 : Absent
1 : Present
b to b : First cleared bit memory table number (4 BCD digits)
1 4
0000 to 0999
e to e : Final cleared bit memory table number (4 BCD digits)
1 4
0000 to 0999
s , s : Check sum (2 hexadecimal digits)
1 2
When m is 0, omit this setting.
setting for numbers of bit memory table entries (256/1000) made at the Support
Tool.
Only if "Yes" is set for the "Response" memory switch, the response indicated be-
low is returned on normal completion.
[ESC] C B
1B 43 42
s , s : Check sum (2 hexadecimal digits)
1 2
This is always added (fixed as "00H").
S Writes "OFF (0)" to all the bit memory tables within the specified range.
m (b1) (b2) (b3)
* * * * * *
(e4) (s1) (s2) [CR]
* * * * * *
0 0 s1 s2
30 30 30 30
Section 9-3
(Sent from host to PT)
(b4)
* *
0D
[CR]
0D
587