Omron NT31 Operation Manuals page 316

Fixed Displays
At the Support Tool, specify the start point and end point as shown in the figure
below (it is not necessary to draw the rectangle from top left to bottom right). By
setting the start point and end point, the position and size are automatically set.
Position (top left corner of the rectangle)
- Display attribute and drawing result
Attribute
Standard
Inverse
Flash
Inverse Flash
S Polygon
The relationship between the properties of a polygon and the displayed graph-
ic are indicated below.
- Properties
General
Position
Attribute
Point
Attribute
Color
Foreground
The line style is fixed as "solid line" and thickness is fixed as one dot.
Start point
Size (X direction)
Only the boundary line of the rectangle is drawn in the
foreground color.
The entire rectangle is displayed in the foreground
color.
Repeated alternation between "standard" display and
no display.
Repeated alternation between "inverse" and "standard"
display.
Coordinates of the point that will be the start position for tiling
in inverse display or inverse flashing display.
Display mode for the polygon ("Display attribute and drawing
result", page 306).
Standard/Inverse/Flash/Inverse Flash
Display color of the polygon (colors other than black and white
featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Section 7-4
Size (Y direction)
End point
Drawing Result
!
No display
!
305