Omron NT31 Operation Manuals page 390

Graphs
Meter Colour
Foreground Foreground color for the present value (needle or fill) of the
meter part (colors other than black and white featured with
NT31C only)
Black/Blue/Red Magenta/Green/Cyan/Yellow/White
Background Background color of the analogue meter (colors other than black
and white featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
+Range Display color for the positive range (colors other than black and
white featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
–Range Display color for the negative range (colors other than black and
white featured with NT31C only) (effective only when a check
mark is set for "Display Sign")
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Settings
Value
Table Entry Number of numeral memory table whose contents are to be
displayed.
Display % Presence/absence of a percentage indication of the contents of
the numeral memory table ("Method for calculating the
percentage value", page382)
Check mark (percentage displayed)/
No check mark (no percentage displayed)
For details on the "Display %" property, refer to 7-4-2 "Text
(Fixed Display)" (page 310)
100% *1 (Specify 100% value using either of "Table Entry" or "Value".)
Table Entry Numeral memory table number check to find the 100% value for
percentage calculation
that
stores the 100% value.
Value Check to find the 100% value for percentage calculation
0% *1 (Specify 0% value using either of "Table Entry" or "Value".)
Table Entry Numeral memory table number check to find the 0% value for
percentage calculation
that
stores the 0% value.
Value Check to find the 0% value for percentage calculation
-100% *1 (Specify -100% value using either of "Table Entry" or "Value".)
Table Entry Numeral memory table number check to find the –100% value
for percentage calculation
that
stores the –100% value.
Value Check to find the –100% value for percentage calculation
Designate the number of the numeral memory table
Designate the 100% value (default: 100)
Designate the number of the numeral memory table
Designate the 0% value (default: 0)
Designate the number of the numeral memory table
Designate the –100% value (default: –100)
Section 7-10
379