Omron NT31 Operation Manuals page 446

Inputting Character Strings
[Common Attributes]
The relationship between the properties of a character string input field and the
input and displayed character string is indicated below.
S Properties
General
Position
Font Type
Scale
Smoothing
Attribute
Color
Foreground
Background
Settings
Table Entry
Length
Focus Frame
Focus Attribute
Position
Foreground color
ABCDE
Background color
Coordinates of the top left corner of the character string
input field
Font for the characters
Standard/Half Height
Scale at which the character string is displayed ("Enlarged
display", page 369)
1×1 (Equal), 1×2 (High), 2×1 (Wide), 2×2, 3×3, 4×4,
8×8
Whether or not smoothing is used for characters with a
scale of 2×2 or larger ("Smoothing", page 369)
Check mark (smoothing executed)/
No check mark (smoothing not executed)
Display mode for the text ("Display attributes and drawing
result")
Standard/Flash/Inverse Flash
Display color of the text (colors other than black and white fea-
tured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Background color of the text (colors other than black and
white featured with NT31C only)
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Number of the character string memory table to which the
input character string is to be written
Range: 0 to 1999
Maximum number of characters in the input character string
Range: 1 to 40
Presence/absence of a frame indicating that the character
string input field has become ready to accept input
Check mark (frame present)/
No check mark (frame not present)
Display status before the input character string is confirmed
("Display attributes and drawing result", page 436)
Standard/Inverse/Flash/Inverse Flash
Section 7-13
435