Omron NT31 Operation Manuals page 176

Memory Initialization
S If "No" is selected, the NT31/NT31C returns to the "MEMORY INIT. MENU"
screen without initializing the memory switches.
On completion of memory switch initialization, the message "Finished" is dis-
played and the NT31/NT31C returns to the "MEMORY INIT. MENU" screen.
After initialization, the memory switch statuses are as follows.
Memory Switch
Start-up Wait Time
Key Press Sound
Buzzer Sound
Printer Controller
Print Method
Screen Saver Movement
Screen Saver Start up Time
Hist. Disp. Method
Resume Function
Comm. Auto-return
Time-out Interval
Retry Counts
Comm. A Method
Comm. B Select
Comm. B Method
* The communication conditions for a bar code reader are initialized as follows:
Data bits: 7 bits; stop bit: 1 bit; parity: none; flow control: RS/CS.
Select "Yes".
The memory tables are initialized. During init-
ialization, the message "Initializing" is dis-
played.
Status
00
ON
OFF
ESC/P
Tone (NT31C only)
Display erased
010
From New Data
OFF
OFF
01
005
Host Link (communications speed = 9600 bps)
RS-232C
None
Section 6-4
*
165