Omron NT31 Operation Manuals page 546

Input of Numeric Values and Character Strings
Inputting a Character String Using "Input Key – String" on the Same Screen
Reference: It is possible to copy the contents in the character string memory table to the char-
[Setting]
Reference: The "input key – control" of 0 to 9 and A to F can be used to input a character string.
[Operation]
Reference: If the screen has only one character string input field, input of a character string
The following describes the basic character string input procedure — inputting a
character string to a character string input field using the "input key – string" pro-
vided on the same screen when the screen has only one character string input
field.
Character string input field
Display
NT31C
Input
NT31C NT31
NT631C
acter string input field using the touch switch "Copy Setting" function (page 516).
When creating a screen using the Support Tool, register the following elements for
the screen.
- Character string input field
- "Input key – string" for touch switches
Characters registered for "labels" are used for inputting a character string.
Marks can be input by specifying FF20 to FFFF
- Touch switch "input key – control"
@ ENT or
The following keys can be registered if necessary.
@ CLR
@ CA
@ BS
@ DEL
@ A, "
(1) Display a screen which has a character string input field.
(2) Input a character string using the "input key – string".
automatically starts when an "input key – string" is pressed. (Specification of an
objective input field is not necessary.)
(necessary for confirming the input)
(for clearing the character string being input)
(for canceling the input)
(for deleting a character located immediately
before the input cursor)
(for deleting a character located immediately
after the input cursor)
(for moving the input cursor)
Section 8-7
.
H
535