Omron NT31 Operation Manuals page 379

Character String Display
[Common Attributes]
368
The relationship between the properties of a character string display and the dis-
played character string is indicated below.
S Properties
General
Position Coordinates of the top left corner of the field in which the character
string is displayed.
Font Type Font for the characters
Scale Scale at which the character string is displayed ("Enlarged dis-
play", page 369).
Smoothing Whether or not smoothing is used for characters with a scale of
2 2 or larger ("Smoothing", page 369).
Attribute Display mode for the character string ("Display attributes and
drawing result", page 370).
Color
Foreground Display color of the text (colors other than black and white featured
with NT31C only)
Background Background color of the text (colors other than black and white fea-
tured with NT31C only)
Settings
Reference
Indirect Method for referencing the character string memory table whose
Reference contents are to be displayed ("Direct reference and indirect refer-
ence", page 370)
Table Entry Numeral memory table number referenced for display ("Direct
reference and indirect reference", page 370)
@ When "Direct Reference" is specified:
@ When "Indirect Reference" is specified:
Length Number of displayed characters
Position
Foreground color
ABCDE
Background color
Standard/Half Height
1 1 (Equal), 1 2 (High), 2 1 (Wide), 2 2, 3 3, 4 4,
8 8
Check mark (smoothing executed)/
No check mark (smoothing not executed)
Standard/Flash/Inverse Flash
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Black/Blue/Red/Magenta/Green/Cyan/Yellow/White
Check mark (Indirect Reference)/
No check mark (Direct Reference)
Table number of the numeral memory table in which the
character string to be displayed is stored.
Table number of the numeral memory table in which the
number of the character string memory table whose contents
are to be displayed is stored.
1 to 40
Section 7-9